USED OIL

-REGENARATION-

Sino-NSH Ger Models

Flow Chart

Technical index

    Test report of treatment of used CC40 diesel engine oil

Technical Specifications

Ⅰ. Application

NSH GER Used Oil Regeneration System is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.

Ⅱ. Edges of GER

² Two main filtering systems in the GER which can ensure the GER Works continuously by batch.

² Environmentally friendly.

² Design according to different customers' needs including Turnkey Project.

² Purify blended oils.

² Low operation cost.

² Low maintenance and replacement expenses.

² High regeneration rate.

² Automatic reverse washing system will extend the lifetime and improve the performance of the filters.

² High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.

² Small size, light weight, low noise.

Ⅲ. Questions & Answers

How GER can run continuously?

GER regenerate waste oil by batch. NSH design two main filtering systems in the GER which can ensure that GER work continuously by turns.

Can GER regenerate mixed oil?

Yes, GER can regenerate mixed oil including diesel engine oil, gasoline engine oil, hydraulic oil, gear oil and other industrial lubrication oil.

What residues or by-products do GER produce after regeneration?

For standard GER series, there are some residues or by-products. There is graphite exist in residues. The graphite is a very valuable substance, customer can extract graphite from residues by themselves. For advanced GER series, there are little residues or by-products coming into being during production. (Advanced GER series has device which can dispose residues or by-products.) 

How to dispose residues and by-products?

For Standard GER series, customer can burn them or bury them. Additionally, customer can sell it to other factories as fuel.

Is every time's treated oil's performances the same?

It depends on waste oil. If each batch of waste oil's performance is the same, the treated oil's performance is the same

What is regeneration rate?

It depends on compositions of waste oil which you want to treat. If there is lots of water, impurities or other matters in waste oil, the regeneration rate is low.

What is treated oil?

The treated oil is base engine oil, the grade of treated oil is a bit lower than virgin oil's.

What are treated oil's applications?

The treated oil can be used as machinery's lubrication oil, diesel engine oil or other lubrication oil. Customers can add additives to treated oil according to definite applications before reuse. Treated oil can also be used as fuel.

What are differences between virgin oil and treated oil?

If the waste oil's properties (before use) are high, the treated oil's properties are also high. Generally, the regeneration process doesn't affect main performances of oil. Some indexes are lower than new oil's, some indexes are the same as new ones'. (Please refer to test report)

Are there any chemical materials needed during processing?

Yes, there are some chemical materials needed in the process (please contact our sales, they will provide you detailed information.)

How long is lifetime of GER plant?

The life time can last several years under proper operation.

How about the maintenance of GER?

The maintenance is very simple. Replace lubrication oil for vacuum pump every year. Check the filters, valves, gaskets periodically.

Does GER needs professional engineers to operate?

The operation of GER is very simple. Generally, two or three workers can operate it after two days' training.

Does GER needs auxiliary equipments?

We suggest that customers order an air compressor which is to improve efficiency of cleaning filter (customers can get it in your own market.). We also suggest that customers order LV oil purifier plant series from NSH. Because customers can use LV to remove particles, water and so on. Generally, customers store treated oil in big tank. During long storage period, there are moisture or impurities dissolved into treated oil.

How to install GER?

Customer can install GER according to operation manual. For GER product line, NSH will send engineers to customers' work site to supervise installation. NSH also provide turnkey project for customers. NSH will establish a workshop for customers including auxiliary facilities.

What space does GER need?

For GER-1, 2, 3, 4, it needs about 200 square meters for operation. For GER product line, NSH engineers will design it for customers as needed.

How long is the delivery time?

For standard GER models, it needs about 50 working days' production period in NSH factory. For GER product line, it needs one or two months 'design time, four months' establishment time (including manufacture time in NSH factory then transport to customer's work site and installation period of GER and auxiliary facilities ).

What kinds of engine oil GER can not regenerate?

Generally, GER can regenerate most engine oils. But for some very high grade gasoline engine oil, GER can remove colloid, oxid, acid, pitch, particles, impurities, water, gas. But the color of treated oil is wine's color after treatment. Customers should mix it with used diesel engine oil or used hydraulic oil before treatment in order to get good treatment oil's color.

What kind of heating system is installed in GER?

GER-1,2,3,4 is equipped with electricity heating system respectively as heating sources. There is also a connection installed in GER1,2,3,4 which can be connected to boiler as option heating sources. Customers can buy and install boiler by themselves. For GER product line, there is no electricity heating system in it. Customers can buy boiler and install it by themselves or order boiler from NSH.

What reasons influence treatment capacity?

There are several reasons such as environment temperatures, efficiency of operator, water, impurities in used oil, properties of used oil and so on.

How long is warranty period?

SINO-NSH Warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment or twelve(12) months after the start up of the system. SINO-NSH's obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period. SINO-NSH shall not in any event be held responsible for any indirect or consequential damages. The performance guarantee will be within limitations as detailed in duty & performance paragraph of this specification.